Wouxun KG-UV8D Plus Manual page 18

VOX (VOX) --- MENU 7
In standby, press + @) the screen displays
Press to enter, press ФУ / 62 to select VOX level (1-9), then press to confirm, finally
press С to return to standby.
Ð The higher level of VOX is set, the higher volume is needed.
> In SCAN апа FM radio modes, the VOX function is not available.
Bandwidth Selection (W/N) --- MENU 8
In standby, press + (f , the screen displays
Press to enter, it shows 'WIDE', press ҒӘ / 62 to select WIDE/NARROW bandwidth, then press
to confirm, finally press @ to return to standby.
There аге two bandwidths for option: WIDE:25KHz and NARR:12.5KHz
Voice Guide (VOICE) --- MENU 9
In standby, press + @ the screen displays
22
(Фшоихип
Professional FM Transceiver
Press to enter, press У / 62 to select ON or OFF , and then press key to confirm, finally
press @ to return to standby.
>» Turn off MENU 9 and MENU 11 at the same time to turn off all the voice prompt if required. |
Transmitting Overtime Alarm (TOA) --- MENU 10
In standby, press + @ , the screen displays
Press the key to access the menu, and after pressing the У / @Ж keys to select the required time,
press the кеу to confirm, and the GD key to return to standby.
TOA has a maximum length of 10seconds, each level corresponding to 1second. OFF: Deactivate TOA.
Special Reminder /\
» When the transmission exceeds the "Time-out timer" set time, a error tone will prompt, and tra-
nsmission is stopped automatically.
Beep Prompt Function (BEEP) --- MENU 11
In standby, press + C @ | the screen displays
23