Working Mode Switch (Ch-Mdf) - Wouxun KG-UV8D Plus Manual

How to Operate
>» Each alarm lasts 10seconds, and after 5 minutes, the alarm will re-activate. Press any key to exit
the function.
TeleAlarm: Activate remote alarm function
In standby, press РЕЗ, the speaker will prompt alarm and transmit ANI ID code +numbers "110".
Press PTT key to exit.
RADIO: Activate the FM radio function
A. Activate FM radio:
In standby, press PF3 to activate FM radio. The screen displays , press (D to access ЕМ
radio function to automatically search FM radio. The search will automatically stop when receiving FM
radio.
FM radio will be received on the searched frequency.
B. Inputting FM radio Frequency
In FM radio mode, press PF3, the screen display
displays
, hold on for 2 seconds, the screen
-It is OK to input the FM radio frequency.
С. Exit FM radio
Press PF3 again to exit FM radio function.
30
(Фшоихип
Professional FM Transceiver
» When FM radio is active, current frequency or channel is still in standby. After receiving the sig-
nals, the transceiver returns to transceiver communication mode. After the signal disappears for
5seconds, the transceiver returns to FM radio. After 5seconds when pressing PTT key to transmit,
the transceiver returns to FM radio automatically.
Working Mode Switch (CH-MDF) --- MENU 21
In standby, press + ( (6). the screen display
Press to enter, press 7% / ED, to select mode
standby.
confirm , press @® it return to
This transceiver has two options for the working mode:
1. Frequency mode(FREQ)
2. Channel mode
There are three channel display selections in channel mode as follows;
Ф Channel (СН) (2 Frequency+ Channel number (CH FREQ) @ Channel name (NAME)
31