Repeater Usage - Wouxun KG-UV8D Plus Manual

Detailed Instruction for Some Important
a. How to use all calls function:
Hold on PTT key to transmit.After transmitting Caller ID Code, input 6 + (EB keys directly.
b. How to use group calls function:
Hold on PTT key to transmit.After transmitting Caller ID Code, input "Group NO." (D + (TD
с. How to use selective calls function:
Hold on PTT key to transmit. After transmitting Caller ID Code, input the Caller ID Code of the sele-
ctive transceiver that you want to speak to.
Note: Selective call is available via selective call key.Selective call code is programmed via @uwouxun
supplied software.Programming the same selective call code of the selective transceiver and Caller ID
code of the selected transceiver.
For example, Caller ID Code for the selected transceiver is 123456, selective call code for the selective
transceiver should be 123456 too.
Repeater Usage
1.Repeater PTT Switch (RPT-PTT)
When the transceiver is in standby, press + ED Э keys and the screen displays
Press но access the settings, and after pressing the @@/ E keys to activate (ON) the PTT transm-
56
(Фшоихип
Professional FM Transceiver
ission, Press to confirm, and press the (EJ key to return to standby.
2.Repeater speaker switch (RPT-SPK)
When the transceiver is in standby, press + ШО keys and the screen will display
Press о access the settings, and after pressing ФУ / 62 to activate (ON) the speaker, press
to confirm, and press @ key to return to standby.
3.Repeater Setting (RPT-SET)
Accessing cross-band repeater mode: when the transceiver is in standby, press + Є Є and the
screen will display
PressCiffjto access, press GV / 62 to select two-way cross-band repeater mode (X-TWRPT) or direc-
tional cross-band repeater mode (X-DIRPT). Press о confirm. And then press @ to return to stan-
dby mode, hold on @ кеу for 2seconds, the transceiver is to access cross-band repeater.
Exit Cross-Band Repeater: In standby, hold (6 for 2seconds, the transceiver exit the cross-band repeater
mode and access transceiver communication mode.
(1) When "ЕРТ-РТТ" is ON, pressing PTT to stop receiving or transmission in cross-band repeater mode.
The transmission frequency is the frequency of the master band, release PTT key to access Two-way
57