Once the installation is complete, go to Start ---> Programs --->VIA --->raid_tool.
exe to enable VIA RAID Tool.
After the software is finished installation, it will
automatically started every time Windows is initiated. You
may double-click on the
tray of the tool bar to launch the VIA RAID Tool utility.
The main interface is divided into two windows and the toolbar above contain the
main functions. Click on these toolbar buttons to execute their specific functions.
The left windowpane displays the controller and disk drives and the right window-
pane displays the details of the controller or disk drives. The available features are
as following:
VIA VT8237 Serial ATA RAID Introduction
Using VIA RAID Tool
icon shown in the system
View by Controller
View by Devices
View Event log
Help Topics
5-13