Table of Contents
Advertisement
Full Screen LOGO Display
This item enables you to show the company logo on the bootup screen. Settings are:
[Enabled]
[Disabled]
Boot Sequence
Press <Enter> and the following sub-menu appears.
1st/2nd/3rd Boot Device
These items allow you to set the sequence of boot devices where AMIBIOS attempts
to load the operating system.
MSI Reminds You...
Available settings for "1st/2nd/3rd Boot Device" vary depending on
the bootable devices you have installed. For example, if you did not
install a floppy drive, the setting "Floppy" does not show up.
Boot From Other Devices
Setting the option to [Yes] allows the system to try to boot from other devices if the
system fails to boot from the 1st/2nd/3rd boot device. Settings are: [Yes], [No].
Shows a still image (logo) on the full screen at boot.
Shows the POST messages at boot.
BIOS Setup
3 - 9
Hide quick links:
Advertisement
Table of Contents
