Download Print this page

F&F FW-R1D Manual

Single bistable relay
Hide thumbs Also See for FW-R1D:

Advertisement

Quick Links

FW-R1D
Single bistable relay
Do not dispose of this device to thrash with other unsorted waste! In accordance
with the Waste Electrical and Electronic Equipment Act any household electro-waste
can be turned in free of charge and in any quan� ty to a collec� on point established for
this purpose, as well as to the store in the event of purchasing new equipment (as per
the old for new rule, regardless of brand). Electro-waste thrown in the trash or aban-
doned in the bosom of nature pose a threat to the environment and human health.
Description of the system
F&Wave is a family of wireless devices controlled by radio with a range of up to 100
meters*. The receivers are available in either a DIN-rail mounting version (housing
1S) or a ø60 flush-mounted version. The transmitters are available as handheld remo-
te controllers or as a flush-mounted version. The receivers relay control signals. The
device that receives a control signal from the transmitter will automatically send it
forward, which allows to increase the range of the remote control.
* Range of up to 100 meters in open space without any interfering factors. In building conditions and in the presence of
interference sources (power lines, transmitters, etc.) the actual range may be smaller.
F&F Filipowski L.P.
Konstantynowska 79/81, 95-200 Pabianice, PL
phone/fax (+48 42) 215 23 83 / (+48 42) 227 09 71
www.fif.com.pl; e-mail: biuro@fif.com.pl
- 1 -

Advertisement

loading
Need help?

Need help?

Do you have a question about the FW-R1D and is the answer not in the manual?

Questions and answers

Summary of Contents for F&F FW-R1D

  • Page 1 Konstantynowska 79/81, 95-200 Pabianice, PL phone/fax (+48 42) 215 23 83 / (+48 42) 227 09 71 www.fif.com.pl; e-mail: biuro@fif.com.pl FW-R1D Single bistable relay Do not dispose of this device to thrash with other unsorted waste! In accordance with the Waste Electrical and Electronic Equipment Act any household electro-waste can be turned in free of charge and in any quan�...
  • Page 2: Features Of The Module

    Installation of this device should be carried out by a qualified installer after re- ading this manual. Dismantling the casing of the device will automatically void the warranty. Before starting the assembly, make sure that the connecting wires are not live. Conditions of storage, transport and use affect the proper operation of the device.
  • Page 3: Wiring Diagram

    Wiring diagram 1 – L power supply 3 – N power supply 4 – control input triggered with level L or N 10/12 – output - NO contact Control input does not cooperate with backlighted buttons. Load capacity The actual maximum load depends on the natu- 16 A/250 V (AC-1) re and design of the receiver.
  • Page 4: Remote Buttons

    Press the selected button on a remote control or in ② a flush-mounted transmitter. Correct pairing will be confirmed by temporary switching off of the output ③ circuit and the LED will turn on again. The receiver can be paired with 8 different transmitters (remote buttons). Pairing with more buttons will remove the first entries made.
  • Page 5 We do not recommend the use of remote bistable transmitters to control a group of receivers due to the possibility of desynchronization of the activation state (especially when operating on larger distances and/or simultaneous use of local buttons on the receivers).
  • Page 6: Technical Data

    Correct operation of LED light bulbs FW-BYPASS-NN with devices of the FW-...-NN series Universal dimmer FW-D1P FW-D1D 2-channel LED controller FW-LED2P FW-LED2D Single relay FW-R1P FW-R1D FW-R1P-P, Single multifunction relay FW-R1D-P FW-R1-P-NN Double relay FW-R2P FW-R2D FW-R2P-P, Double multifunction relay FW-R2D-P...
  • Page 7: Warranty

    Warranty F&F products are covered by a 24 month warranty from the date of purchase. The warranty is effective only with a proof of purchase. Contact your dealer or directly with us. CE declaration F&F Filipowski L.P. declares that the device is in conformity with the essential require- ments of Directive 2014/53/EU of the European Parliament and of the Council of 16 April 2014 on the harmonisation of the laws of the Member States relating to the ma- king available on the market of radio equipment and repealing Directive 1999/5/EC.