F&F FW-R2P Manual page 5

We do not recommend the use of remote bistable transmitters to control
a group of receivers due to the possibility of desynchronization of the activation state
(especially when operating on larger distances and/or simultaneous use of local but-
tons on the receivers).
Activation of the thermal protection is indicated by a steady pulsing of communication
LED, switching off of the output circuit and the lack of its reactivation possibility. After
lowering the temperature to a safe value the output circuit will remain switched off
until restarted.
Devices of the F&Wave system
Type
Flood sensor
Remote control
Wall button
Flush-mounted box ø60
Type
Flush-mounted box ø60
Battery transmitters
FW-FS1
FW-KEY, FW-RC4, FW-RC10
FW-WS1, FW-WS2, FW-WS3
FW-WSO1, FW-WSO2, FW-WSO4
FW-RC5
AC transmitters
FW-GS1, FW-GS2, FW-GS4
FW-RC4-AC
- 5 -
Product
Product