5. Carefully pull the dust collection container (Pos. 3) out of the product
without whirling up any dust particles.
6. Carefully pull the dust collection container (Pos. 3) out into a disposal
bag.
7. Seal the disposal bag airtight using a cable tie and dispose of it
according to the applicable regulations.
WARNING
This container must be disposed of properly. Never empty and reuse the
container.
8. Insert the new dust collection container (Pos. 3) into the product.
9. Close the maintenance door (Pos. 2) again, lock it with the clamp
fasteners (Pos. 1) and put the product back into operation.
7.3.2 Draining the condensate from the compressed air vessel
Depending on usage, but at least once a month, the condensate must be
drained from the compressed air vessel.
The condensate drain valve is located on the rear of the product.
Pos. Description
1
Condensate drain valve with
knurled screw
1502867-00
Fig. 19: Draining the condensate
Pos. Description
2
- 72 -
Condensate drain valve
EN
Need help?
Do you have a question about the FilterMaster XL and is the answer not in the manual?