Positioning The Extraction Hood - Kemper FilterMaster XL Operating Manual

Pos. Description
1 On/Off switch
2 Signal horn
3 Signal light
4 Sight glass

6.3 Positioning the extraction hood

The extraction arm or extraction hood is designed in such a way that it can
be adjusted and moved easily by hand. Once it has been positioned, the
extraction hood maintains its set position of its own accord. Furthermore,
both the extraction hood and the arm can be pivoted through 360° so that
almost any position can be set. It is important that the extraction hood is
always positioned properly in order to achieve adequate capture of the
welding fumes. The correct position is shown on the following image.
• Position the extraction arm so that the extraction hood is located
approx. 25 cm diagonally above the weld.
1502867-00
Note
Switches the product on or off
Indicates a fault.
(See chapter Troubleshooting)
Signals the operation of the product.
Visual check of the direction of
rotation of the fan impeller.
Tab. 21: Operating elements
Fig. 17: Positioning the extraction hood
- 67 -
EN