Download Print this page

F&F DMV-1 Quick Start Manual

Trms digital voltage indicator, 1-phase

Advertisement

Quick Links

DMV-1 TRMS
Digital voltage indicator,
1-phase
Do not dispose of this device in the trash along with other waste! According to the
Law on Waste, electro coming from households free of charge and can give any amo-
unt to up to that end point of collecti on, as well as to store the occasion of the purchase
of new equipment (in accordance with the principle of old-for-new, regardless of brand).
Electro thrown in the trash or abandoned in nature, pose a threat to the environment
and human health.
Purpose
The DMV-1 TRMS voltage indicator is used for continuous re-
ading of 1-phase main voltage.
Functioning
The DMV-1 indicator with TRMS measurement system shows the
actual RMS value of the voltage in the phase.
F&F Filipowski L.P.
Konstantynowska 79/81, 95-200 Pabianice, POLAND
phone/fax (+48 42) 215 23 83 / (+48 42) 227 09 71
www.fif.com.pl; e-mail: biuro@fif.com.pl
- 1 -

Advertisement

loading
Need help?

Need help?

Do you have a question about the DMV-1 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for F&F DMV-1

  • Page 1 Electro thrown in the trash or abandoned in nature, pose a threat to the environment and human health. Purpose The DMV-1 TRMS voltage indicator is used for continuous re- ading of 1-phase main voltage. Functioning The DMV-1 indicator with TRMS measurement system shows the actual RMS value of the voltage in the phase.
  • Page 2 Front description Mounting 1. Switch off the power supply. 2. Connect the indicator directly to the mains according to the connection diagram. 3. Switch on power supply. - 2 -...
  • Page 3 Wiring diagram L power supply N power supply - 3 -...
  • Page 4 Technical data power supply 100÷300 V AC supply frequency 45÷55 Hz indication range 100÷300 V indication accuracy 0.5% display 1×digital LED 10×6 mm power consumption terminal 2.5 mm² screw terminals (cord) 4.0 mm² screw terminals (wire) tightening torque 0.5 Nm working temperature -20÷50°C dimensions...