Bin Setup Menu - Lexmark C950de User Manual

Understanding printer menus
Menu item
Portrait Width
3–48 inches
76–1219 mm
Portrait Height
3–48 inches
76–1219 mm
Feed Direction
Short Edge
Long Edge

Bin Setup menu

Menu item
Output Bin
Standard Bin
Bin [x]
Configure Bins
Mailbox
Link
Link Optional
Type Assignment
Description
Sets the portrait width
Notes:
•
11.69 inches is the US factory default setting. Inches can be
increased in 0.01‑inch increments.
• 296.9 mm is the international factory default setting. Millimeters
can be increased in 1‑mm increments.
• If the width exceeds the maximum, then the printer uses the
maximum width allowed.
Sets the portrait height
Notes:
•
48 inches is the US factory default setting. Inches can be increased in
0.01‑inch increments.
•
1219 mm is the international factory default setting. Millimeters can
be increased in 1‑mm increments.
• If the height exceeds the maximum, then the printer uses the
maximum height allowed.
Specifies the feed direction
Notes:
• Short Edge is the factory default setting.
•
Long Edge appears only if the longest edge is shorter than the
maximum width supported by the tray.
Description
Specifies the default exit bin
Note: Standard Bin is the factory default setting.
Specifies configuration options for exit bins
Notes:
• Mailbox is the factory default setting. This setting
treats each bin as a separate mailbox.
•
Link configures all available bins as one large exit bin.
•
Link Optional links together all available exit bins
except the standard bin and only appears when at
least two optional bins are installed.
•
Type Assignment assigns each paper type to an
output bin or linked bin set.
•
Bins assigned the same name are automatically
linked unless Link Optional is selected.
112