Safety; Product Description; Important Safety Instructions - LIVOLTEK GT1-2K5D2 User Manual

2.

Safety

2.1 Product Description

LIVOLTEK GT1 2.5~10kW series
business and remote locations. The inverter generates new able
electricity from solar energy, and provides Pure Sine Wave AC output
for connected equipment. Please read and follow all the instructions and
cautions on the inverter and this user manual during installation,
operation or maintenance at all times.

2.2 Important Safety Instructions

The safety instructions in this manual cannot cover all the precautions
that should be followed. Perform operations considering actual onsite
conditions. LIVOLTEK shall not be held liable for any damage caused
by violation of the safety instructions in this manual.
2.2.1 Personnel Safety
• The inverter must be installed, electrically connected, operated and
maintained by specially trained technician;
• The qualied technician must be familiar with the safety regulations
of electrical system, working process of PV power generation system,
and standards of local power grid;
• The technician must read through this User Manual carefully before
any operations.
2.2.2 Inverter Protection
WARNING
Do not disconnect the PV connectors when the inverter is running.
Ensure that there is no voltage or current before installing or
disconnecting any connectors.
All safety instructions, warning labels, and nameplate on the inverter
should not be removed or covered.
WARNING
When the photovoltaic array is exposed to light, it supplies a dc voltage
to this equipment.
2
grid-tied inverter, ideal for home,
CAUTION
Do not touch any hot parts (such as the heat sink) during operation.
CAUTION
Hot surfaces – To reduce the risk of burns – Do not touch.
"Do not remove cover until 5 minutes after disconnecting all sources of
supply."
As soon as receiving the inverter please check if it is damaged during its
transportation. If yes, please contact your dealer immediately.
Only qualied personnel can change the country settings.
• Adequate ventilation must be provided for inverter installation
location Mount the inverter in vertical direction, and ensure that no
objects block the heat dissipation
3