NewLine TRUTOUCH VN Series User Manual
Hide thumbs
Also See for TRUTOUCH VN Series:
- User manual (30 pages) ,
- Service manual (20 pages) ,
- Service manual (19 pages)
Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for NewLine TRUTOUCH VN Series
Summary of Contents for NewLine TRUTOUCH VN Series
- Page 1 Interactive Display User Manual -V1.0-...
-
Page 2: Table Of Contents
Ports Remote Control Temperature Control B . Installation Guide Safety Precautions Installation Precautions Installation Installing the Internal PC (Optional) Installing Newline Assistant C . Getting Started Power On Power Off Calibration D . Operating the Interactive Display Start Screen Home... - Page 3 Welcome to the world of TRUTOUCH. Thank you for choosing the TRUTOUCH VN series interactive display. Please use this document to get the most out of your display. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
-
Page 4: Safety Instruction
The voltage/current of the rear power output port is 5 V/2 A (maximum). Purchase the power code/AC adapter according to customer needs. The port can be used for Newline Android box X10D. Please do not connect any products with different... - Page 5 WARNING Do not put items on the top of the product. or liquid medicine) on the top of the product. If any water or liquid is spilled on the product, a short circuit may occur and Do not walk on or hang any items on the product. Do not install the product in an improper place.
- Page 6 CAUTION Do not install the product on a carpet or cloth. Do not use a cloth such as table cloth to cover the product. Use the battery correctly. battery usage. It is recommended to use the designated type of battery and install the battery by correct electrodes (positive and negative).
-
Page 7: About This Document
About This Document This document describes multiple functions, instructions, and notes about the product. Symbols are used in this document to indicate operations that need particular attention. The Provides additional information to supplement operation in the main NOTE text. Provides tips for operation. Indicates a potentially hazardous situation that, if not avoided, could result in equipment damage, data loss, performance deterioration, or CAUTION... -
Page 8: Overview
Overview Introduction The Interactive Touch display adopts the advanced touch technology and All in One design, and integrates video, audio, touch, writing, and multi-media presentation functions. This product does not require additional products, installation and wiring, and commissioning and maintenance to function. Dedicated smart system is customized as a meeting assistant. -
Page 9: Rear View
Rear View ◆ TT-8618VN/TT-7518VN TT-6518VN Speakers Front Buttons Button Cover Front Ports Pen/Eraser Tray Pen/Eraser Tray Cover Power Switch Power Supply Plug Internal PC Port (OPS) Rear Ports... -
Page 10: Ports
The voltage/current of the rear power output port is 5V/2A (maximum). Purchase the power code/AC adapter according to customer needs. The port can be used for Newline Android box X10D. Please do not connect any products with different power requirement. Otherwise it may... - Page 11 USB2.0 Embedded TT-8618VN/TT-7518VN TT-6518VN Tip: You are advised to connect X10D to HDMI rear 2.
-
Page 12: Front Buttons
Front Buttons ◆ Buttons Operations Functions Power on/off Indicator LED status: Power Short press Steady on red: shut down mode Steady on green: working state Home Short press Go to the home page Return Short press Return to the last menu/Exit Menu Short press Open the menu... - Page 13 Buttons Functions Buttons Functions Switch Source to HDMI Power On/Off. Rear 3. Switch Source to Internal Toggle Display Backlight Mode (including Auto, Standard and EnergyStar mode). Mute/Unmute Audio. Switch Source to DisplayPort. Freeze the Current Screen, Click Again to Exit Freeze Open the Display Menu or Function.
-
Page 14: Temperature Control
Temperature Control In certain special installation or operation environments, the ventilation condition of the screen is poor and the heat dissipation efficiency is low. As a result, the internal temperature can rise. When the internal temperature sensor detects that the temperature has reached the threshold, the system will go to shut down mode to avoid any permanent damages to the components caused by high temperature. -
Page 15: Installation Guide
Installation Guide Safety Precautions Installation Environment ◆ Keep Temperature Below 120 F Keep Away From Do Not Use Combustible Vapors Outdoors (gas leaks, etc.) Installation Direction ◆ Hang the Product Horizontally No Vertical Installation Do Not Lay Flat... -
Page 16: Installation Precautions
Installation Precautions Weight Loading ◆ Weight of the product: 87.1 lb/39.5 kg (TT-6518VN), 111.3 lb/50.5 kg (TT-7518VN), 143.3 lb/65 kg (TT-8618VN) When using a mobile stand, please ensure the weight of the product is less than the loading capacity of the mobile stand. When using the wall-mount bracket, please ensure the wall can support the weight of the product. -
Page 17: Installation
Installation The dimensions of the 4 bracket mounting holes on the back panel are VESA MIS- Fcompliant (TT-8618VN or TT-7518VN: 800 x 400 mm/31.50 x 15.75 in; TT-6518VN: 600 x 400 mm/23.62 x 15.75 in). Please use metric M8 screws with length of 10 to 15 mm (0.40 to 0.59 in) to secure the touch display with the mounting system. -
Page 18: Installing The Internal Pc (Optional)
Installing the Internal PC (Optional) CAUTION The internal PC does not support hot plugging. Therefore, you must insert or remove it when the display is powered off. Otherwise, the display or internal PC may be damaged. Perform the following steps to install the internal PC. You will need to purchase the internal PC separately. -
Page 19: Installing Newline Assistant
Installing Newline Assistant Introduction ◆ Newline Assistant is the tool used as a bridge between smart system and Internal PC (OPS). It helps to add windows software to smart system as well as to protect USB data/camera when switching between sources. -
Page 20: Getting Started
Getting Started Power On Step 1: Plug the power supply into the power outlet fully and plug the power connector into the side of the product. Ensure the power is in the range of 100 V to 240 V with frequency at 50 Hz/60 Hz ± 5%. The power current must be grounded. Note The power outlet should be installed near the equipment and shall be easily accessible. -
Page 21: Power Off
Power Off Step 1: Power off the screen in the following situations: If there is no whiteboard data or screenshot(s), press the power button on the front panel or the power button on the remote control to power off the screen.Go to Step 4. -
Page 22: Calibration
Step 3: In the Warning dialog box, click Cancel , and the power indicator will turn to red. Step 4: If you are not going to use the product for an extended period of time, we recommend you to switch the power switch to “Off”. Note If an internal PC is equipped, the internal PC and the screen are powered off simultaneously when you power off the system. - Page 23 Step 4: Select in the Tablet PC Settings window. Step 5: Select Touch input from the option and start calibration.
- Page 24 Step 6 release it until moves to the next positioning point. Complete the calibration process as instructed. To provide calibration samples, tap the crosshair each time that it appears on the screem. Right-click anywhere on the screen to return to the last calibration point.
-
Page 25: Operating The Interactive Display
Operating the Interactive Display Start Screen When the product is turned on, the product will show the start screen page. As shown Home Touch the screen to start a meeting, and the product will go to the Home page. As Logo (Shortcut to Settings) Side Toolbar Clock (Shortcut to World Clock) - Page 26 Shortcut for Settings Click the icon on the Home page to enter the logo & Wallpaper Setting page to set the logo and wallpaper. The logo and wallpaper can be obtained locally or from a Shortcut for World Clock ...
- Page 27 Shortcut for Calendar Click this icon to enter the Calendar page and set schedules and synchronize with Google Side Toolbar The Annotation Mode/Discussion Mode/Home/Return/Windows icons are displayed by default in the toolbar at two sides of the screen. The bottom side toolbar can be customized as your choice (The default icon is Windows).
- Page 28 The functions of the side toolbar are as follows: Icon Functions Enter annotation mode, and click again to stop annotation and save screenshot. Enter discussion mode. Go to Home page. Return to the last menu/Exit. Enter the internal PC source. Manage currently running applications.
-
Page 29: Icon Functions
Main Toolbars Icon Functions Switch to the internal PC source. Enter Connection to switch to the connected product, including cabled signal sources and wireless applications. Cabled signal sources include HDMI Front, HDMI Rear (1 to 3), and DisplayPort. Wireless applications include Montage and Trucast. Discussion provides discussion board function and screen annotation functions. -
Page 30: System Settings
System Settings Enter the system setting page using one of the following methods: on the Home page. Click Press on the remote control. In the Quick Setting Menu, click the icon. Network Settings ◆ Enter the Network submenu to set a LAN, enable Wi-Fi, view network information, and enable the Wake up via LAN function. - Page 31 Language and Input Method Settings ◆ Enter the Language & Input Method submenu to set language and input method. The default input method of the system is FloatNSplit Table Keyboard Plus, and Hardware keyboard must be enabled. If you want to switch to another language, switch the keyboard input method via Keyboard &...
- Page 32 FloatNSplit Table Keyboard Plus description: Drag this icon and change the size of the keyboard. : Drag this icon to move the keyboard. : Click this icon to switch the keyboard unfold mode. Setting a Language Click Language at the right side.
- Page 33 Adding an Input Method Click Current keyboard at the right side. In the Change keyboard page, click CHOOSE KEYBOARDS, unfold Keyboard & input methods, and click the button at the right side according to reference to add an input method (multiple choices can be selected). Setting an Input Method ...
- Page 34 Storage ◆ Enter the Storage submenu to view space distribution of the internal storage. APPs ◆ Enter the Apps submenu to view downloaded applications by type, running applications, and all applications.
-
Page 35: Date And Time Settings
Date and Time Settings ◆ Enter the Date & Time Setting submenu to set the date and time. Before setting the date and time, users should click Select time zone to select local time zone. Setting a Date You can automatically obtain the system date or customize a date. To automatically obtain a date, select Automatic date &... -
Page 36: Setting Time
Setting Time You can automatically obtain the system time or customize time. To automatically obtain time, select Automatic date & time. To customize time and time format, set them in Set time and Use 24-hour format. -
Page 37: Power On/Off Setting
Power ON/OFF Setting ◆ Enter the Power ON/OFF Setting submenu to set automatic power on/off time and the time for the system to enter the shut down mode. To set the automatic power on time, select Auto power on, and set the power on time in Power on time To set the automatic power off time, select Auto power off, and set the power off time in Power off time... - Page 38 To set the energy saving time, click Energy saving. In the dialog box that is displayed, set a duration after which the display enters the lock mode if the display is left un- operated. After the display is locked, if the user does not operate the display within 120s, the display enters the shut down mode.
-
Page 39: Tool Bar Setting
Tool Bar Setting ◆ Enter the Tool Bar submenu to set whether to display the side tool bar and icons. Left: Click to turn on/off the left tool bar. Right: Click to turn on/off the right tool bar. Customized icon: Click the icon under Customized icon to display the last shortcut Connection, you can set a signal source to enter after this shortcut key is clicked in Favorite Connection. - Page 40 Enter the Logo & Wallpaper Setting submenu to set background, lock page, or Home page log. On this page, click View to select a picture and automatically upload it to replace current picture. Click Default. The logo and wallpaper are reset to Newline pictures. Smart Eye Protection ◆...
- Page 41 Newline Extension ◆ Enter the Newline Extension submenu to set external devices (Trucast, X10D, and Trucam) to be displayed in the Cable Connection column of Connection and the wireless application Montage to be displayed in the Wireless Connection column. Furthermore, you can set the HDMI Rear channel to be displayed on the Trucast, X10D, or Trucam screen.
-
Page 42: Windows
About ◆ Enter the About submenu to view firmware or system version information, system upgrade, and factory setting. Windows On the Home page, click Windows to enter the Internal PC source page, as shown displayed. -
Page 43: Connection
Wireless applications include Montage and Trucast. Note added to the Newline assistant, the system prompts users to install Montage and add it into the Newline assistant. For details on the addition method, see section “Add Shortcuts to Home Page". Connection. - Page 44 on the screen. You can also erase selected content or clear all contents. Page navigation Preview or delete pages. Whiteboard Mode ◆ Click Discussion in the main toolbar or click in the side toolbar to enter the 7 8 9 10 Click in the side toolbar or click...
-
Page 45: Whiteboard Functions
Icon Name Icon Function Click the icon to switch between annotation mode and the discussion Mode Switch mode. (See more detail in whiteboard mode section) Click to use the pen function, and the icon turns into blue. Click and hold the icon for two seconds to set the size or color. - Page 46 Page settings Click and hold for two seconds to set the color and the pattern of the new page, Switch Whiteboard Mode Click in the lower left corner of the discussion mode to switch between whiteboard modes. : Annotation mode The background is transparent and the real-time image of the current signal source will...
- Page 47 : Discussion mode on the page as required. Pen Type On the Whiteboard, two types of pens are supported: Pen and highlighter. : used to write. Highlighter : used to highlight. Characters covered by comments are visible. Line Size and Color On the Whiteboard, click and hold for two seconds to set the size and color.
- Page 48 Eraser Two methods are available to erase written errors or content as follows: Fist/hand back erasing: corresponding erase shape is a round with diameter 100pt. Spot erasing: Click to clear wrong or unnecessary content. Click and hold the icon for two seconds to set the size of eraser (S 10pt/M 30pt/L 50pt), it would be shown Screenshot In annotation mode, click to save the current image as a picture.
- Page 49 Pictures saved through screenshots can be viewed and obtained using the following methods: After a meeting is complete, screenshots are saved on the Save meeting Discussion Click on the home page and choose Internal storage > Pictures > Screenshots > image to view or obtain screenshots.
-
Page 50: Page Operations
Clear All On the Whiteboard page, click to show the pop-up windows to make users to choose Page Operations ◆ You can preview, select, and delete a created writing page. Page Preview Click at the lower right corner in the discussion mode. All pages will be displayed. Click one page to switch to that page for more operations, as shown in the following... - Page 51 Note to see more. Page Selection and Deletion On the Navigation page, you can select or delete writing pages according to Click to select all pages. Click to delete selected pages.
-
Page 52: Add Shortcut
Step 2: Click the icons on top to switch the list between Windows programs, external signal sources, and pre-installed gadgets. Click to view the Windows programs that the Newline Assistant uploads to the Smart system. For details,see "Add Quick Start Windows Programs in Smart System". -
Page 53: Add Quick Start Windows Programs In Smart System
Add Quick Start Windows Programs in Smart System ◆ Step 1: In Windows, run the Newline Assistant program and drag the software icons or folder shortcut icons that you want to add from desktop or menu to the Newline Assistant window. The applications added or deleted through the Windows system will be automatically updated to the smart system until the upload progress reaches 100%. - Page 54 Windows programs added by Newline Assistant in Step 1. Note By default, the Newline Assistant application is added on the tab. Step 4: Tap the icon and add the shortcut at the Home page. Tap again and remove it.
-
Page 55: Gadget
Gadget On the Home page, click Gadget. On the page that is displayed, all applications can be Icon Functions Click this icon to enter the Calendar application, set schedule, and update to Google Calendar. Click this icon to enter the system setting page. Click this icon to enter the calculator application. -
Page 56: File Management
File Management The product supports connection to USB flash memory. Enter the File Viewer application, you can preview all files in the internal storage and storage devices File Viewer Page ◆ On the Home page, click File Viewer File Preview ◆... -
Page 57: File Filtering
File Filtering ◆ picture, music and video. The system supports two view modes: list and thumbnail. You can click increment or decrement manner. -
Page 58: File Operation
File Search ◆ Enter the File Viewer application, and click . In the dialog box that is displayed, enter keywords in the search box according to requirements. The system will display a list of File Operation ◆ Enter the File Viewer application. You can create folders according to requirements, operation, click in the upper right corner for more operation. -
Page 59: End Meeting
End Meeting Manually End Meeting ◆ On the Home page, click . The Save meeting discussion page will be displayed. The meeting will end and timer will stop. File Name The Save meeting discussion page displays pages, annotation page screenshots, and remote control screenshots in the discussion mode in this meeting, as shown in the SS (remote control screenshot). - Page 60 Back to meeting continued. End meeting: The Warning dialog box will be displayed. Click . All writing pages and screenshots will be deleted, and go back to start screen page. The current meeting will be ended and the timer will reset. Click Cancel.
- Page 61 Automatically End Meeting ◆ your privacy. Choose Settings > Power ON/OFF Setting to set the duration. For details on the setting method, see “Power ON/OFF Setting”. After the display is locked, if it is operated again within 120 seconds, the display is unlocked.
-
Page 62: Quick Setting Menu
Quick Setting Menu Icon Functions Drag the slider to adjust the brightness. Drag the slider to adjust the volume. Click the icon to mute/unmute. Click the icon to turn on/off the beep sound. Click the icon to turn on/off the Smart system Wi-Fi. Click the icon to turn on/off the audio only function. -
Page 63: Serial Port Control
Serial Port Control Connect RS-232 port to the PC or controlling product. Enable RS-232 serial port Port: COM1 (Set according to PC or controlling product’s port number) Baud rate 19200 Odd/even check None Data bits Stop bit The following tables list controlling codes, querying codes and return. Function Controlling codes Return codes... - Page 64 Function Controlling codes Return codes 7F 08 99 A2 B3 C4 02 FF 7F 09 99 A2 B3 C4 02 FF 01 17 VOL - 01 17 CF 01 CF 7F 08 99 A2 B3 C4 02 FF 7F 09 99 A2 B3 C4 02 FF 01 18 VOL + 01 18 CF 01 CF...
- Page 65 Function Controlling codes Return codes Increase backlight 7F 08 99 A2 B3 C4 02 FF 7F 09 99 A2 B3 C4 02 FF 01 47 brightness 01 47 CF 01 CF Decrease backlight 7F 08 99 A2 B3 C4 02 FF 7F 09 99 A2 B3 C4 02 FF 01 48 brightness 01 48 CF...
- Page 66 Function Querying codes Return codes 7F 09 99 A2 B3 C4 02 FF 01 37 XX CF 7F 08 99 A2 B3 C4 02 FF NOTE: Power supply 01 37 CF XX indicates the power on/off state. 7F 08 99 A2 B3 C4 02 FF 01 82 XX CF 7F 08 99 A2 B3 C4 02 FF Speaker...
- Page 67 Function Querying codes Return codes 7F 08 99 A2 B3 C4 02 FF 01 84 XX CF Switch to child safety 7F 08 99 A2 B3 C4 02 FF NOTE: lock 01 84 CF 7F 08 99 A2 B3 C4 02 FF 01 83 XX CF 7F 08 99 A2 B3 C4 02 FF Whiteboard state...
-
Page 68: Faqs & Troubleshooting
FAQs & Troubleshooting Symptom Troubleshooting Methods Check whether the power supply is connected. Check whether the power supply plug is properly connected. Check whether the power supply line is The screen cannot be powered on or properly connected. the indicator is off. Check whether the rocker switch is enabled. - Page 69 Symptom Troubleshooting Methods Disable the automatic power-on/off function. For details, see section "Power ON/OFF Setting". The system is automatically powered Check whether the display entered shut down on/off when no operation is performed. mode due to no operation for an extended period of time.
- Page 70 Symptom Troubleshooting Methods The conference records cannot Format the USB flash drive to the FAT32 and the system prompts "The format. target storage product has no write permissions." Check whether the internal PC is properly inserted in the slot. Check whether the internal PC enters the shut The internal PC has no signal.
- Page 72 Model TT-6518VN TT-7518VN TT-8618VN Touch Points 10 Points Writing Tools Eraser, Stylus or Finger Scan Speed 250 Hz Positioning Center area 1.0 – 1.5 mm/ Edge area 1.2 – 2.0 mm Accuracy Communication USB-A Interface Transportation/Storage Storage Temperature/ -20 °C – 60 °C/20% RH – 80% RH(Non coagulation) Humidity Working Temperature/...
- Page 73 Model TT-6518VN TT-7518VN TT-8618VN Smart System Chips ARM A53 x 41.4 GHz 2 GB Flash 8 GB Multimedia File Formats Android Software On Screen Annotation Discussion Board...
-
Page 74: More Information
More Information For more information Please visit our website (www.newline-interactive.com) for detailed instruction manual. Contact Us for Support Please email us at support@newline-interactive.com. Our company is devoted to product innovation and technology enhancement. Therefore, we may change product specs and...
Need help?
Do you have a question about the TRUTOUCH VN Series and is the answer not in the manual?
Questions and answers