Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for KERN YKB-A10
Summary of Contents for KERN YKB-A10
- Page 1 KERN & Sohn GmbH Ziegelei 1 Phone: +49-[0]7433- 9933-0 D-72336 Balingen Fax: +49-[0]7433-9933-149 E-Mail: info@kern-sohn.com Internet: www.kern-sohn.com Operating Instructions Dot Matrix Printer KERN 911-013 Version 1.1 2017-01 911-013-BA-e-1711...
-
Page 2: Table Of Contents
KERN 911-013 Version 1.1 2017-01 Operating instructions Dot matrix printer Contents Technical data ....................3 Declaration of Conformity ................3 Unpacking ......................4 Scope of delivery: ........................4 Set Up and commissioning ................5 Printer parts ....................... 6 Description of buttons and „LED“ displays ............ 7 Self-test............................ -
Page 3: Technical Data
1 m. lines 0°C – 40°C Operating temperature Humidity of air max. 10-90 % relative (not condensing) Dimensions 100x180x106 mm 470 g (excl. paper roll) Weight 2 Declaration of Conformity To view the current EC/EU Declaration of Conformity go to: www.kern-sohn.com/ce 911-013-BA-e-1711... -
Page 4: Unpacking
3 Unpacking 3.1 Scope of delivery: Printer Connection plug Colour cartridge 1 x roll of paper Mains plug adapter (Europe) Operating instructions (without illustration) If one the articles listed above is missing please contact your supplier immediately. 911-013-BA-e-1711... -
Page 5: Set Up And Commissioning
Do not expose printer to direct sunlight, impacts or vibration. Power is supplied via the external mains adapter. The stated voltage value must be the same as the local voltage. Only use original KERN mains adapters. Using other makes requires consent by KERN. 911-013-BA-e-1711... -
Page 6: Printer Parts
5 Printer parts 1. Cover for paper compartment (removable) 2. Casing top 3. Casing bottom 4. ON/OFF switch 5. „LF“ button 6. „SEL“ button 7. LED display „SEL“ 8. LED display “Power“ for power supply 9. Mains connection 10. RS232 interface 911-013-BA-e-1711... -
Page 7: Description Of Buttons And „Led" Displays
6 Description of buttons and „LED“ displays LED display „Power“ LED displays for power supply • Glows in standby mode LED display „SEL“ • Flashes when paper supply almost empty (0.5 sec. Interval); switch off LED by pressing SEL- key; Replace paper roll •... -
Page 8: Line Feed
6.3 Line feed Press the „LF“ button in standby mode (“SEL” display off); this makes the line feed start without data being printed. To stop the line feed, again press the „LF“ button. 6.4 Start-up The printer will be ready for operation immediately after it has been connected to the power supply;... - Page 9 Inserting the paper Paper holder Moving in the direction of the arrow, pull the paper holder gently outwards and insert the paper roll in such a way that at least 5 to 6 cm of paper are protruding. Pull the paper through the device’s slit and then through the paper cover’s slit.
-
Page 10: Insert The Ink Ribbon
6.6 Insert the ink ribbon Turn off printer Detach paper compartment cover Insert ink ribbon carefully by making use of the small transport wheel (1) on the left facing forward, between the print head (2) and the plates (3) (See illustration). -
Page 11: Microswitch
All changes will be adopted the next time you restart your printer. • Always use KERN accessories and weighing balances when working with your printer. Disconnect the printer from the mains voltage before connecting the cable to the printer. -
Page 12: Instant Help
8 Instant help Symptom Remedy Power supply display Check whether the power supply unit is connected to the „P“ not lighting up. printer and to the mains. Paper does not Check whether the paper has been inserted correctly, emerge. whether the output slot of the mechanism is free of obstructions No printing is taking Check, whether the power cord is connected at both ends and...
Need help?
Do you have a question about the YKB-A10 and is the answer not in the manual?
Questions and answers