KERN 911-013 Operating Instructions Manual
Dot matrix printer
Hide thumbs
Also See for 911-013:
- Configuration manual (41 pages) ,
- Operating instructions manual (12 pages)
Table of Contents
Advertisement
Quick Links
Download this manual
See also:
Configuration Manual
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for KERN 911-013
Summary of Contents for KERN 911-013
- Page 1 KERN & Sohn GmbH Ziegelei 1 Phone: +49-[0]7433- 9933-0 D-72336 Balingen Fax: +49-[0]7433-9933-149 E-Mail: info@kern-sohn.com Internet: www.kern-sohn.com Operating Instructions Dot Matrix Printer KERN 911-013 Version 1.0 12/2015 911-013-e-1510...
-
Page 2: Table Of Contents
KERN 911-013 Version 1.0 12/2015 Operating instructions Dot matrix printer Contents Technical data ....................3 Unpacking ......................8 Scope of delivery: ........................8 Set Up and commissioning ................12 Printer parts ..................... 15 Description of buttons and „LED“ displays ..........20 Self-test............................ -
Page 3: Technical Data
150, 300, 1200, 2400, 4800, 9600, 19200 Baud Parameter/data format ASCII Parity Even, odd, none Communication protocol ASCII Working life 1 m. lines 0°C – 40°C Operating temperature Humidity of air max. 10-90 % relative (not condensing) Dimensions 100x180x106 mm 470 g (excl. paper roll) Weight 911-013-BA-e-1510... -
Page 4: Unpacking
2 Unpacking 2.1 Scope of delivery: Printer Connection plug Colour cartridge 1 x roll of paper Mains plug adapter (Europe, UK, US) Operating instructions (without illustration) If one the articles listed above is missing please contact your supplier immediately. 911-013-BA-e-1510... -
Page 5: Set Up And Commissioning
Do not expose printer to direct sunlight, impacts or vibration. Power is supplied via the external mains adapter. The stated voltage value must be the same as the local voltage. Only use original KERN mains adapters. Using other makes requires consent by KERN. 911-013-BA-e-1510... -
Page 6: Printer Parts
4 Printer parts 1. Cover for paper compartment (removable) 2. Casing top 3. Casing bottom 4. ON/OFF switch 5. „LF“ button 6. „SEL“ button 7. LED display „SEL“ 8. LED display “Power“ for power supply 9. Mains connection 10. RS232 interface 911-013-BA-e-1510... -
Page 7: Description Of Buttons And „Led" Displays
To achieve this, press the „SEL“ button whereupon the „SEL“ display will go off; the printer is now in standby mode and will no longer receive data. To return to operating mode, press the „LED“ button, whereupon the „SEL“ display lights up again. 911-013-BA-e-1510... -
Page 8: Line Feed
LED „P“ will light up. 5.5 Paper Detach the cover of the paper compartment (See illustration) by pulling the cover upwards in the direction of the arrow. Preparation of paper Prepare paper properly (See illustration) not ok not ok 911-013-BA-e-1510... - Page 9 Press and hold the „LF“ key until the paper emerges from the outlet slot of the mechanism Tearing off paper ⇒ Pull the printout across the direction of printout that it rests on the cutter bar of the printer housing Do not pull printout upwards. 911-013-BA-e-1510...
-
Page 10: Insert The Ink Ribbon
Turn off printer Detach paper compartment cover Insert ink ribbon carefully by making use of the small transport wheel (1) on the left facing forward, between the print head (2) and the plates (3) (See illustration). 911-013-BA-e-1510... -
Page 11: Microswitch
All changes will be adopted the next time you restart your printer. • Always use KERN accessories and weighing balances when working with your printer. Disconnect the printer from the mains voltage before connecting the cable to the printer. -
Page 12: Instant Help
No printing is taking Check, whether the power cord is connected at both ends and place and paper does whether the printer prints a self-test. not emerge. If you are unable to remedy the error, please contact your supplier. 911-013-BA-e-1510...
Need help?
Do you have a question about the 911-013 and is the answer not in the manual?
Questions and answers