Digital Or Optical Audio Setup; Digital Audio Cable - LG LRM-519 User Manual

Digital Coaxial or Optical Audio Setup

Digital Audio cable

Digital audio cable provides 5.1 channel audio to an amplifier or TV that
supports 5.1 channel audio.
Notes
• If the Recorder is connected to a home entertainment center
amplifier/receiver or a TV that supports Dolby
Dolby Digital decoder), select Settings on the Start menu, select
DVD Settings, select DVD Audio Output, and then select Bitstream
under Dolby Digital. Otherwise, select PCM.
Note Dolby Digital playback—5.1 audio—is only available if:
©
• The DVD that you are watching supports 5.1 channel audio.
Your home entertainment center amplifier/receiver supports 5.1
•
audio playback.
You have selected Bitstream under Dolby Digital.
•
• If the Recorder is connected to a home entertainment center
amplifier/receiver or a TV that supports DTS playback, select Settings
on the Start menu, select DVD Settings, select DVD Audio Output,
and then select Bitstream under DTS. Otherwise, select Off.
Note When Bitstream is selected, the Recorder sound effects are
disabled. Analog audio output (provided through red and white audio
cables connected to AUDIO OUT on the back of the Recorder) is also
disabled.
Digital coaxial audio
COAXIAL IN
1. On the Recorder, connect a digital audio coax cable (not included) to
the DIGITAL OUT – COAXIAL connector.
2. On your home entertainment center amplifier or receiver or your
TV, connect the digital audio coax cable to the Digital Audio In
connector.
Digital playback (a
©
Recorder
Entertainment Center
23