Using The Digital Zoom Function - LG LE5016 Series Owner's Manual

To Register Preset Positions
1. Move the camera to a point you wish by using the
, , , buttons.
2. Press SET or click the
3. Select the preset number you wish to register.
4. Press ENTER or click the
The position and its number are memorized.
5. Repeat steps 1 to 4 to add additional positions.
NOTE
Preset numbers from 0 to 255 are available on this unit but the
actual preset range differs depending on PTZ cameras.
Changing to a Picture in a Preset Position
The following function is available only with cameras provided with
the preset function. The preset function makes the combination
camera move to the programmed preset position. It is necessary to
program preset positions for the combination camera beforehand.
1. Press the MOVE button or click the
2. Use number buttons to enter the memorized preset position's
index number then press ENTER or click the
camera moves to the preset position and the picture of the
camera in that position appears on the monitor.
To Clear the Preset Position
You can clear a memorized preset position.
1. Press the CLEAR button or Click the
2. Use number buttons to enter the memorized preset index
number then press ENTER or Click the
preset positions.
NOTE
This function may not be available depending on PTZ cameras.
To Tour The Preset Positions
You can tour all preset positions.
1. Press the TOUR button or Click the
All registered preset positions in the camera will be selected
and the camera position image will be switched on the active
monitor.
2. You can stop the tour by pressing the TOUR
button or clicking the
icon.
icon.
icon.
icon. The
icon.
icon to clear the
icon.
icon.
Setup for PTZ Cameras
You can adapt the camera to your requirements by setting up the
respective items in menus.
1. Click the icon.
The setup menu appears in the selected window of the main
monitor.
2. Use , , , ,
,
buttons to set the options.
NOTE
• Refer to the manuals of the PTZ camera for more details.
• Some PTZ cameras may not operated correctly with this unit.
• You cannot control the other functions when the PTZ virtual
remote control is displayed.

Using the Digital Zoom function

You can enlarge the current screen 2 times using the digital zoom
function on the live one channel with full screen mode or one
channel playback with full screen mode.
1. Click the [ZOOM +] button on the live one channel with full
screen mode or one channel playback with full screen mode.
2. You can use the zoom screen as following.
• You can move the position of the zoom screen by using the
w/s/a/d buttons.
• You can move the zoom screen by using the mouse. Drag &
drop a point to the specific point to move the zoom screen.
3. Click the [ZOOM -] button to exit.
NOTE
The zoom function is deactivated when below case.
• When double click the left mouse button.
• Press the specific channel or function button which front
panel of the unit.
• Press the STOP button during the playback.
Installation 23
,
, and
3