If You Select "Use Wired (Ethernet) Connection; 1B. Use Phone Line; Phone Configuration; Enter Your Home Phone Number - LG LRM-519 User Manual

If You Select "Use Wired (Ethernet) Connection"

If your network uses dynamic IP addresses and no Proxy server,
select Next.
If your network uses a static IP address or a Proxy server, select
Configure Network.
Select Static IP address, and then use the numeric keypad on the
remote to enter the IP address, subnet mask, default gateway address,
and DNS address.
Notes
• Each group of numbers in the addresses must be three digits; add
leading zeros (0) as needed. For example, if the fourth section of the
subnet mask is "0" enter 000.
• To clear an entry, use the arrow keys on the remote to select the
incorrect entry, and then enter the correct number.
If you use a proxy server, select Configure Proxy Server. Enter the
proxy server name by using the remote, and any port if needed.
Notes
• If the port is less than five digits, add leading zeros (0) as needed. For
example, enter port 8085 as 08085.
• To clear an entry, use the arrow keys on the remote to select the
incorrect entry, and then enter the correct number.

1b. Use Phone Line

The Recorder can use a dial-up connection to the Internet to download
the Microsoft Program Guide service and software updates.
®
Important When using a dial-up connection, a software update can
take up to 90 minutes to download; Program Guide updates can take
up to 20 minutes or longer. For more information, see Downloading
the Program Guide and Software Updates.

Phone Configuration

If your dial-up connection requires pulse dialing (instead of tone
dialing) or if you must dial a prefix to get an outside phone line, select
Configure phone.
If the dial-up connection uses tone dialing and does not use a dialing
prefix, select Next.

Enter Your Home Phone Number

To determine the best phone numbers the Recorder should use to
connect to the Microsoft Program Guide service, use the numeric
keypad on the remote to enter the area code and prefix (first three
digits) of your phone number.
Note To clear an entry, use the arrow keys on the remote to select
the incorrect entry, and then enter the correct number.
33