Omcan MS-IT-0370-S Instruction Manual page 8

Maintenance
20/30 blade rotations with the flywheel. Then release the "A" button and stop the rotation of the blade.
7. Honing: press and hold the "B" button and bring it in contact with the blade. Perform 1/2 blade rotations
with the flywheel. Then release the "B" button and stop the blade rotation.
8. With your right hand rotate the flywheel clockwise.
9. Lift and rotate by 180° degrees the sharpener and reposition it in its initial position.
GRINDING STONES CLEANING
To obtain an excellent sharpening the grinding stones must always be clean. Remove dirt and grease with
alcohol and the supplied brush.
MAINTENANCE
SPARE PARTS
Please request only original spare parts.
CLEANING
After long periods of inactivity, always perform the cleaning operations before using the machine again. Clean
all the accessible parts by using a cloth damped with water.
WARNING
Please avoid water jets.
DANGER
Please be careful during the cleaning operations: danger of injury.
WARNING
Check that the front blade protection covers the part of the blade used for cutting.
COMPONENTS REMOVAL
FOOD-HOLDING PLATE
• Turn the food-holding plate locking lever counterclockwise.
• Pull up and remove the food holding plate.
SLICE-DEFLECTOR
• Loosen the screw and remove the slice deflector.
SLICER RECEIVING TRAY
• Loosen the two handles and pull out the tray.
8