Setting Road Safety Features - Thinkware D1K32D User Manual

Settings
Options
Motion Detection Sensitivity
Record Timer
Battery Protection
Battery Cutoff voltage
Wintertime Battery Protection
• To use parking mode, you must install the hardwiring cable. If continuous power is not supplied to the
product, the product will stop recording when the vehicle engine is turned off.
• The vehicle battery will not be charged while the vehicle is parked. If you record in parking mode for an
extended period, the vehicle's battery may be depleted and you may not be able to start the vehicle.
• For more information about parking mode, refer to "3.5 Using parking mode" on page 18.
• The battery cutoff voltage can be set only when the Battery Protection setting is set to Enabled.
• If the off voltage value is too low, the product may consume the battery completely depending on the
conditions like the vehicle type or temperature.

6.4 Setting road safety features

From the mobile viewer, tap Dash Cam settings
settings.
Options
Safety Cameras
Mobile Zone Alert
Vehicle Type
Initialize ADAS
LDWS
(Lane Departure Warning)
LDWS Speed
FCWS
(Forward Collision Warning)
Low Speed FCWS
FVDW (Front Vehicle Departure
Warning)
28
Select from Lowest/Low/Mid/High/ Highest for the motion detection mode
sensitivity.
Select from Disabled/3hrs/6hrs/12hrs/24hrs/48hrs/72hrs for the record time.
Select from Enabled/Disabled for the battery protection.
Select from 12V (11.6-12.3)/24V (23.2-24.6) for the battery cutoff voltage.
Select the month(s) to apply the battery protection feature.
Road Safety Settings to manage the road safety features
>
Select from Enabled/Disabled for the safety cameras.
Select from Enabled/Disabled for the mobile zone alert.
Select the vehicle type from Sedan/SUV/Truck (Bus).
In Initialize ADAS, tap Initialize
Select from Disabled/Low/Mid/High for the LDWS sensitivity.
Select from 50km/h / 60km/h / 80km/h / 100km/h for the LDWS detection speed.
Select from Disabled/Low/Mid/High for the sensitivity.
Select from Disabled/Low/Mid/High for the sensitivity.
Select from Enabled/Disabled for the FVDW feature.
Description
Description
OK to proceed with initializing.
>