Connections - JVC Everio GZ-MC500AA Instructions Manual

Install all of the desired software in the same
way.
To display [SETUP] screen, double-click the CD-
ROM icon in the [My Computer] window.
NOTES:
Even if PowerDirector/PowerProducer/PowerDVD
have already been installed on the PC:
Video files captured with this camera can only be
handled on the provided software. Please install
and use the provided software (PowerDirector
Express NE, PowerProducer 2 Gold NE,
PowerDVD 5 NE). If PowerDirector/
PowerProducer/PowerDVD have already been
installed, uninstall them before installing the
provided software.
If you perform installation of a software that is
already installed, uninstallation will start. In this
case, perform the installation again after
uninstallation is finished.
Windows Messenger has to been closed during
CyberLink DVD Solution installation. If it is running
during installation, [Information] screen appears.
To close Windows Messenger:
1) While holding [Ctrl + Alt] key, click [Delete] key
so that [Task Manager] appears.
2) Click [Processes] tab.
3) Select [msmsgs.exe].
4) Click [End process].

Connections

Connecting the USB cable
Connect the USB cable to copy still image, video
files and voice files in a recording medium to the
PC.
Camera
1
To assure safety, make sure all units are
turned off before making any connections.
2
Use the USB cable to connect the camera
to the PC.
NOTES:
It is recommended to use the AC Adapter as the
power supply instead of the battery pack.
When the USB cable is connected, turning on or off
the camera causes malfunctions of the PC.
If you connect the camera to the PC through a USB
hub, compatibility issues between the hub and the
PC may result in instability in the operation of the
PC. If this happens, connect the camera directly to
the PC, not through the hub.
Do not use an extension USB cable.
– 11 –
PC
To USB connector
USB cable
To USB connector