JVC Everio GZ-MC500AA Instructions Manual page 9

Attaching the Core Filter
Attach the core filters to the cables. The core
filter reduces interference.
1
Release the stoppers on both ends of the
core filter.
Stopper
2
Run the cable through the core filter, leaving
approx. 3 cm of cable between the cable plug
and the core filter.
Wind the cable once around the outside of the
core filter as shown in the illustration.
Core Filter
3 cm
Wind the cable so that it is not slack.
3
Close the core filter until it clicks shut.
NOTES:
Take care not to damage the cable.
When connecting a cable, attach the end with the
core filter to the camera.
How to Use the Audio Extension Cable
When using optional headphones, connect to
the provided audio extension cable (with a core
filter attached), then connect the audio extension
cable to the camera. The core filter reduces
interference.
To
Wind once.
Audio Extension Cable (provided)
GETTING STARTED
Open the cover.
Core Filter
9
EN
Headphones