Bracket Shooting; Manual Focus - JVC Everio GZ-MC500AA Instructions Manual

Bracket Shooting

In addition to an image with the exposure set by
the camera, two other images are recorded with
exposure values shifted to the +0.3 EV and –0.3
EV sides. You can select the image that has a
suitable exposure after shooting.
Decreased exposure
Standard exposure
Increased exposure
1
Set the power switch to
2
Press MODE to select
3
Set the recording mode dial to other than
so that is displayed.
4
Move the multi-controller to e (
that the indicator appears on the display.
5
Press the recording start/stop button for
bracket shooting. Three still images are
recorded.
To cancel the bracket shooting
Move the multi-controller to e (
indicator disappears.
.
.
) twice so
) so that the
RECORDING FEATURES

Manual Focus

The camera's Full Range AF system offers
continuous focusing ability from close-up to
infinity. However, the correct focus may not be
obtained depending on the shooting condition.
In this case, use the manual focus mode.
1
Set the power switch to
2
Set the recording mode dial to other than
so that is displayed.
3
Press FOCUS. The manual focus adjustment
indicator appears.
4
To focus on a further subject, rotate the
manual focus ring counterclockwise.
Focusing on a further
subject
To focus on a nearer subject, rotate the manual
focus ring clockwise.
Focusing on a nearer
subject
33
EN
/
FOCUS
Manual Focus Ring
.
CONTINUED ON NEXT PAGE