Various Playback Operations; Playback Zoom - JVC Everio GZ-MC500AA Instructions Manual

Various Playback Operations

Still playback (Pause)
Press 49 during normal playback.
To resume normal playback, press 49 again.
Search playback
During normal playback, move the multi-
controller to e for forward search, or w for
reverse search.
Moving the multi-controller to w or e
repeatedly increases the search speed for
each direction. (–60x to +60x)
To resume normal playback, press 49.
Locating the start point of the file or skip the
file
Move the multi-controller to t to locate the start
point of the next file. Moving the multi-controller
to t repeatedly skips files in forward direction.
Move the multi-controller to r to locate the start
point of the current file. Moving the multi-
controller to r repeatedly skips files in reverse
direction.
If the multi-controller is moved to t or r
during normal playback or search, playback
resumes after locating the start point of a file.
Frame-by-frame playback
While playback is paused, move the multi-
controller to e or w.
Moving the multi-controller to w or e repeatedly
advances or reverses the still picture frame by
frame.
To resume normal playback, press
Slow motion playback
While playback is paused, move and hold the
multi-controller to e or w for over 2 seconds.
To stop slow motion playback, press 49.
VIDEO RECORDING & PLAYBACK

Playback Zoom

You can magnify the playback image up to 5x.
1
During normal playback, at the point you want
to zoom in, press 49 to pause playback.
2
Slide the zoom lever towards T to zoom in.
The full view of the image is displayed in the small
screen on the lower right side. The * mark
indicates the centre point of the magnified area.
3
Move to the magnified area you want to view
with the multi-controller (r/t/w/e).
4
To zoom out, slide the zoom lever towards W.
When the zoom is set all the way to W (wide-
angle) side, sliding the zoom lever to W switches
the display to the index screen. (
Deleting Video Files
Press
controller (r/t) and press 49.
You can select the desired file to be deleted with
the multi-controller (w/e).
To delete multiple files at once, see page 40.
4
9.
, then select [EXECUTE] with the multi-
23
EN
pg. 22)