Updating From The Download Mode - Datamax I-4206 Operator's Manual

5.4.2

Updating from the Download Mode

Required Update Procedure for Application Version 2.08 or earlier*
Step Displayed Message
1
CPPU.QB21
13/19!3022011
2
VQEBUF!TPGUXBSF
TFOE!TPGUXBSF
3
VQEBUF!TPGUXBSF
SFBEJOH!JNBHF
4
FSBTJOH!GMBTI
TPGUXBSF!JNBHF
5
XSJUJOH!GMBTI
TPGUXBSF!JNBHF
*This can also be used as an alternate download method for all other version levels.
I-Class
Operator Action
Press and hold the
PAUSE and TEST
Keys while turning
'On' the printer to
enter the Download
Mode.
Using the DOS
copy command,
copy the filename
to the printer (for
an example see
'Comment' Step 1
in Section 5.4.1).
No action required. The printer is receiving
No action required. The program has been
No action required. The new program is being
Comme nt(s)
The Boot Loader version
is displayed.
Note: This information
will vary with the printer
model and Boot Loader
version.
The printer is ready to
accept the new application
version.
Note: The parallel port
(LPT1) must be used to
write to the printer.
the new image (program).
received and verified;
now memory is being
cleared of the previous
application.
written into Flash
memory. Upon
completion, the printer
will automatically reset
and start the new
application.
Note: If 'Uncalibrated'
is displayed, the printer
must be calibrated (see
Section 5.0).
85