Quick Test Mode: Print Test Labels - Datamax I-4206 Operator's Manual

4.0.3 Quick Test Mode:
Note: The Quick Test Mode functions are disabled while processing data
from communications interfaces until the Host Timeout value expires.
You can program a time delay between the printing of test labels using
the 'Print Test Rate' feature; see Section 4.1.7.
I-Class
Print Test Labels
The DOWN ARROW Key scrolls to the previous
test function.
The UP ARROW Key scrolls to the next test
function.
The ENTER Key will change the selected test
label quantity of 2, 100, 1000, or 9999 (except the
'Configuration Label', quantity of one). Holding
down the key scrolls quantities.
The ESCAPE Key will exit the Quick Test Mode
without printing.
The TEST Key will print the selected test label at
the selected quantity. During test label printing,
this key also functions as a cancel key (the printer
will prompt
cancellation occurs).
you for confirmation before
31