Updating From The Ready Mode - Datamax I-4206 Operator's Manual

5.4.1

Updating from the Ready Mode

Update Procedure for Application Version 2.091 or greater
Step Displayed Message
1
!
SFBEZ
2
VQHSBEJOH!
TPGUXBSF
3
5323!
4/15!1803703111
4
!
SFBEZ
84
Operator Action
Using the DOS
copy command
(where 'filename'
is the program to be
loaded and 'lpt1' is
the selected
interface port),
enter the following:
copy filename lpt1:
No action required. The new application program
No action required. The printer has reset
No action required.
Comme nt(s)
As an example, this would be
entered as:
copy 4212tb
(Where 'lpt1' is the host
computer's port; however,
this selection can differ to
include a serial or other port,
as the printer is equipped.)
The Ready Indicator will
flash as data is received.
is being stored and verified.
automatically and is now
displaying the new firmware
version.
The new application is now
running.
Note: If 'Uncalibrated' is
displayed, the printer must
be calibrated (see Section
5.0).
~
1.zs lpt1
I-Class