Datamax I-4206 Operator's Manual page 62

System Settings (continued)
VOID DISTANCE
0.25in
RETRY COUNT
1
52
(0-2.00)
(0-3)
The distance to backup on the defective
label and the font size in which to print the
VOID text.
Establishes the number of retries the printer
will attempt to reprint a defective label after
it has been voided. If the last label printed
has been voided, it will be reprinted after
correcting the problem. After the last retry,
the printer will stop and display a fault
message.
Note: If the CANCEL Key is pressed when the
printer is faulted and the last printed label was
not completed, the operator has a choice to
cancel the reprint of the last label. Subsequent
pressing of the CANCEL Key will allow canceling
the entire label batch.
(Pressing the CANCEL Key while the printer is
stopped and faulted will indicate whether the last
label is waiting to be reprinted. The operator has
a choice to cancel the reprint by pressing the
ENTER Key or allowing the reprint to take place
by pressing the ESCAPE Key.)
I-Class