Related Manuals for Daniela DAN60GTG
Summary of Contents for Daniela DAN60GTG
- Page 1 U s e r M a n u a l DAN 6 0 GTG DAN 7 0 GTG DAN 9 0 GTG 6 0,7 0, 9 0 c m G a s C o o k t o p d a n i e l a a p p l i a n c e s . c o m . a u...
- Page 2 2005 from a father’s love to a daughter and naming it after Daniela, now the new proprietor. Daniela has worked closely with her father for many years learning from his decades of industry experience. Daniela with her extensive knowledge and understanding of appliances, now continues her father’s legacy with a...
- Page 3 The manufacturer cannot be held responsible for any inaccuracies due to printing or transcription errors that may be found in this User Manual. The pictures shown in the figures in this handbook are purely indicative. 02 9604 1226 | sales@danielaappliances.com.au | daniela.au...
- Page 4 This manual explains the proper installation and use of your appliance, please read it carefully before using even if you are familiar with the product. The manual should be kept in a safe place for future reference. In case of failure, only the Authorized Technical Service may repair this hob. Otherwise the guarantee will be null and void.
-
Page 5: Safety Instructions
The device has been manufactured of recyclable material. By bringing old device to recycling collection center, you show that you care about nature. Ask your local environmental care authority for information on location of such facilities. 02 9604 1226 | sales@danielaappliances.com.au | daniela.au... -
Page 6: Product Description
Product Description *Note: For burner: W=Triple Ring Wok burner, R=Rapid burner, SR=Semi-Rapid burner, A=Auxiliary burner D A N I E L A A P P L I A N C E S... - Page 7 Technical Specifications 02 9604 1226 | sales@danielaappliances.com.au | daniela.au...
-
Page 8: Installation
Installation Before Installation: • Before cutting into any bench tops, ensure the minimum clearances to walls, adjacent surfaces and overhead surfaces required by the relevant gas appliance installation code (see above) will comply. Dimensions are specified in millimeters (mm) Overhead cupboards and range hood = 650 mm. Side and rear clearance = 200 mm to any burner edge. -
Page 9: Electrical Connection
The power supply cord (supplied) must not touch against any hot surfaces and must be placed so that its temperature does not exceed 75°C at any point along its length. 02 9604 1226 | sales@danielaappliances.com.au | daniela.au... - Page 10 After having installed the hotplate, the GPO must always be in an accessible position. Wiring diagram 4. Gas Connection Install in accordance with relevant gas standards and/or codes of practice applicable. Connect the elbow fitting to the appliance gas manifold connection, and check that seals between the elbow and manifold connection are in place and in good condition.
-
Page 11: Setting The Gas Pressure
GAS CONVERSION INSTRUCTIONS: The manufacturers servicing instructions detail how authorised personnel may convert the hotplate from Natural gas to Universal LPG or from Universal LPG to Natural gas. Contact the manufacturer or agent as required. 02 9604 1226 | sales@danielaappliances.com.au | daniela.au... - Page 12 Start Using Your Appliance DAN60GTG DAN70GTG DAN90GTG D A N I E L A A P P L I A N C E S...
- Page 13 Auxiliary (small) = 80 mm For best efficiency and to ensure utensil handle does not overheat, place the utensil centrally on the burner and adjust the flame height so all the flame remains under the utensil. 02 9604 1226 | sales@danielaappliances.com.au | daniela.au...
-
Page 14: Stainless Steel
Maintenance & Troubleshooting Cleaning and maintenance should be carried out with the appliance cold especially when cleaning the enameled parts. Avoid leaving alkaline or acid substances(lemon juice, vinegar etc.) on the surfaces. STAINLESS STEEL The stainless steel hob of the hotplate must be cleaned regularly (e.g. weekly) to ensure long life expectancy of the hotplate. - Page 15 (b) removal of components for service— (ii) pilot and flame safeguard; (iii) ignition system; (v) gas control; (vii) hotplate top; (ix) thermocouple; (c) parts replacement— (iv) electronic ignition; (d) adjustments— (iv) ignition (spark gap); 02 9604 1226 | sales@danielaappliances.com.au | daniela.au...
-
Page 16: Troubleshooting
TROUBLESHOOTING Servicing of the hotplates must only be done by an authorised service representative (see back of this booklet) and the hotplate must not be modified. Power must be disconnected before any servicing or maintenance is conducted. DO NOT MODIFY THIS APPLIANCE. It is recommended the hotplate serviced by an authorized person at least every 2 years. - Page 17 NOTE: the model number and details are to be recovered below for future reference. Please have the following information ready before calling our customer care team. Your order/appliance details Full name: ___________________________________________ Order/invoice number: __________________________________ Place of purchase:______________________________________ Oven serial number: _____________________________________ 02 9604 1226 | sales@danielaappliances.com.au | daniela.au...
Need help?
Do you have a question about the DAN60GTG and is the answer not in the manual?
Questions and answers