Brushroll - Hoover UH70015 Owner's Manual

6. GENERAL MAINTENANCE
THE BRUSHROLL
W h en to R e p la ce
WARNING - Risk of personal injury - brushroll may suddenly restart - unplug before cleaning or
servicing. When brushroll brushes are worn, it should be replaced.
To check condition of brushes, move the edge of a card across bottom plate while manually turning
brushroll (Fig. 6.16). To maintain cleaning effectiveness, replace brushroll if brushes do not touch card.
How to R e mo ve B ru s h ro l l
Turn the cleaner on and select the Bare Floor setting.
Once the cleaner has changed settings turn the
cleaner OFF.
Disconnect cleaner from electrical outlet.
6.17
Turn cleaner over and remove 5 screws as is
indicated by arrows.
6.18
Remove bottom plate.
6.19
Remove brushroll.
How to R e pl ace B r us h r o l l
6.20
Align new brushroll and belt.
6.21
Replace brushroll.
6.22
Replace bottom plate and screws.
What to Buy
To assure cleaning effectiveness, use only Hoover
Brushroll part #48414156.
It is important that you use only genuine HOOVER
assure your cleaner operates at peak performance. To order
bags please visit www.hoover.com. HOOVER
can be identified by the trademark-
16
6.17
6.20
®
® parts to
products
®
6.16
6.18
6.19
6.22
6.21