Good Read: When To Indicate - Datalogic MAGELLAN 1400I Product Reference Manual

General Features

Good Read: When to Indicate

This feature specifies when the scanner will provide indication (beep and/or flash its green LED)
upon successfully reading a bar code. Choices are:
•
•
•
NOTE
After Decode
DEFAULT
After CTS goes inactive, then active
2-8
Good Read = Indicate after decode
Good Read = Indicate after transmit
Good Read = Indicate after CTS goes inactive, then active
This option (Indicate after CTS goes inactive, then
active), which uses CTS, is only valid for RS-232 inter-
faces.
PROGRAMMING BAR CODES
START / END
After Transmit
Magellan
®
1400i