Length Control - Datalogic MAGELLAN 1400I Product Reference Manual

Symbologies
Codabar — continued

Length Control

Fixed Length Decoding—
bar code if the label length matches one of the configurable fixed lengths.
Variable Length Decoding—
decode a bar code if the label length falls in the range of the configurable minimum and maxi-
mum length.
Configuring Fixed Length Decoding:
1. Scan the START bar code.
2. Scan the Fixed Length Decoding bar code.
3. Scan the END bar code.
4. Set Length 1 to the first fixed length by following the
5. Set Length 2 to the second fixed length (or to '000' if there is only one fixed length) by
Configuring Variable Length Decoding:
1. Scan the START bar code.
2. Scan the Variable Length Decoding bar code.
3. Scan the END bar code.
4. Set Length 1 to the first variable length by following the
5. Set Length 2 to the second variable length by following the
START / END
Fixed Length Decoding
5-48
When fixed length decoding is enabled, the scanner will decode a
below.
ming Instructions
following the
Codabar Length 1, Length 2 Programming Instructions
below.
gramming Instructions
below.
Programming Instructions
PROGRAMMING BAR CODES
When variable length decoding is enabled, the scanner will
Variable Length Decoding
Codabar Length 1, Length 2 Program-
below.
Codabar Length 1, Length 2 Pro-
Codabar Length 1, Length 2
DEFAULT
Magellan
®
1400i