Datalogic MAGELLAN 1400I Product Reference Manual page 64

Interface Related Features
Keyboard Wedge — cont.
Intercharacter Delay
START / END
One-half of the delay specified below is inserted between scancodes within each character. If the transmission speed is too high, the
system may not be able to receive all characters. You may need to adjust the delay to make the system work properly. Selectable
from 000 to 255 in 10msec increments. To configure this feature, scan the "START/END" bar code above to place the unit in Pro-
gramming Mode, then the "Set Intercharacter Delay," followed by the three digits (zero padded) from the Alphanumeric table in
Appendix C, Alpha-Numeric Pad
bar code above/
3-36
This feature does not apply to the USB Keyboard interface.
NOTE
PROGRAMMING BAR CODES
representing your desired length. Exit programming mode by again scanning the "START/END"
DEFAULT SETTING FOR THIS FEATURE:
000 (No Delay)
Set Intercharacter Delay
Magellan
®
1400i