Maintenance; Battery Replacement; Battery Safety - Extech Instruments ExStik CL200 User Manual

Maintenance

Battery Replacement

1. Twist off the battery compartment cap.
2. Replace the four (4) CR2032 batteries observing correct polarity.
3. Replace the battery compartment cap.

Battery Safety

Remove and immediately recycle or dispose of used batteries according to local regulations,
•
keeping the batteries away from children. Do NOT dispose of batteries in household trash or
incinerate.
Used batteries can cause severe injury or death.
•
Call a local poison control center for treatment information.
•
• This unit contains four (4), 3.0 V, lithium batteries.
Non-rechargeable batteries are not to be recharged.
•
Do not force discharge, recharge, disassemble, heat above 122
•
so may result in injury due to venting, leakage, or explosion resulting in chemical burns.
• Ensure that the batteries are installed correctly according to correct polarity (+ and -).
Do not mix old and new batteries, different brands or types of batteries, such as Alkaline,
•
carbon-zinc, or rechargeable batteries.
Always completely secure the battery compartment. If the battery compartment does not close
•
securely, stop using the product, remove the batteries, keeping the batteries away from children.
o
7
F (50 o C), or incinerate. Doing
CL200A_en-US_V9.1 8/24