How To Change The Direction Of The Drain Hoses - Haier HWM66-0613TT User Manual

How to change the direction of the drain hoses

Figure 1 indicates the leave factory
installation position of the drain hose.
Extend the drain hose from the side of wash tub
Put soft items on the ground. Lean the
machine down gently with the front
surface facing the ground. Take off
the drain hose from the cabinet.
Take the hose out of the fixing groove.
(See to Figure 2).
Embed the drain hose into the groove along
the side of the wash tub in the order of (1)~(2),
heading for the side of the wash tub.
(See to Figure 3).
Embed the drain hose into the groove with
hands. Take care not to damage the drain
hose in fastening the fixing clamp.
Extend the drain hose from the rear side
Take out the drain hose from the fixing groove. Extend it from
the rear side as per the direction of the arrow. (When the drain
hose is extended from the rear side, it can be hung on the
point for drain hose at the two sides of the cabinet.)
(See to Figure 4).
Soft item
Soft item
Embed into the
groove in turn
5
Back
Front
Figure 1
Figure 2
Extend to the
wash tub side
Figure 3
Figure 4