How To Change The Direction Of The Drain Hoses - Haier XPB58-111S User Manual

How to change the direction of the drain hoses

Figure 21 indicates the ex factory installation
position of the drain hose.
Extend the drain hose from the side of spin tub
Put soft items on the ground. Lean the machine
down gently with the front surface facing the
ground. Take off the drain hose from the cabinet.
Take the hose out of the fixing groove.
(See to Figure 3).
Embed the drain hose into the groove along the side
of the spin tub in the order of (1)~(3), heading for the
side of the spin tub. (See to Figure 4).
Embed the drain hose into the groove with
hands. Take care not to damage the drain
hose in fastening the fixing clamp.
Extend the drain hose from the rear side
Take out the drain hose from the fixing groove. Extend it from
the rear side as per the direction of the arrow. (When the drain
hose is extended from the rear side, it can be hung on the
point for drain hose at the two sides of the cabinet.)
(See to Figure 5).
INSTALLATION AND ACCESSORY PARTS
Soft item
Soft item
Extend to the
spin tub side
7
Back
Front
Figure 2
Figure3
Embed into the
groove in turn
Figure 4
Figure 5