How To Change The Direction Of The Drain Hoses - Haier HWM72-27S User Manual

How to change the direction of the drain hoses

Figure 1 indicates the ex factory
installation position of the drain
hose.
Extend the drain hose from the side of spin tub.
Take off the drain hose from the hanging
hole of the cabinet. Pull the drain hose
fixing hook outwards gently to take out
the drain hose from the two fixing hooks.
(As per Figure 2)
Rotate the drain hose fixing hook for 90
to take it out from the installation hole
(As per Figure 3).
Install the two drain hose
fixing hooks taken out into
the installation hole at the
other side of the base frame
(to aim at the installation
hole accurately
lean the washing machine
forward slightly).Then rotate
for 90 (As per Figure 4).
Pull the fixing hook outwards slightly.
Inlay the drain hose into the fixing hooks
reliably along the groove at spin tub side,
and make it extend towards spin tub side.
Then hang the drain hose into the hanging
hole at the spin tub side. (As per Figure 5).
Extend the drain hose from the rear side
Take out the drain hose from the fixing
hook. Extend it from the rear side (When
the drain hose is extended from the rear
side, it can be hung on the point for drain
hose at the two sides of the cabinet.)
(See to Figure 6).
Rotate the fixing
hook for 90
you can
Take off the fixing
hook downwards
Figure 3
5
Drain hose
fixing hook
Side sectional view
Fixing hook
Drain hose
installation hole
fixing hook
Drain hose
Pull outwards
slightly
Take off
the drain hose
Rotate the fixing
hook for 90
to fix it
Insert the fixing hook into the
installation hole upwards
Figure 1
Figure 2
Figure 4
Figure 5
Figure 6