Download Print this page

How To Change The Direction Of The Drain Hoses; Install The Water Inlet Hose; Select The Water Level - Haier XPB70-0713S User Manual

Twin-tub washing machine
Hide thumbs

Advertisement

How to change the direction of the drain hoses

Figure 1 indicates the ex factory installation
position of the drain hose.
Extend the drain hose from the side of spin tub
Put soft items on the ground. Lean the machine
down gently with the front surface facing the
ground. Take off the drain hose from the cabinet.
Take the hose out of the fixing groove.
(See to Figure 2).
Embed the drain hose into the groove along the
side of the spin tub in the order of (1)~(3), heading
for the side of the spin tub. (See to Figure 3).
Embed the drain hose into the groove with
hands. Take care not to damage the drain
hose in fastening the fixing clamp.

Install the water inlet hose; Select the water level

Insert the water inlet hose into the water-filling
entrance on the control pane directly.(pull it
out to dismantle it)
Select water level according to the
quantity of the laundries.
Set the water level adjusting lever
to needed line.
Water inlet hose
Water inlet
5
Soft item
Soft item
Extend to the
Embed into the
spin tub side
groove in turn
Maximum
Medium
Minimum
Back
Front
Figure 1
Figure 2
Figure 3
Water level
indicator
Max
Med
Min

Advertisement

loading

  Related Manuals for Haier XPB70-0713S