Fault; Trouble Shooting - Brink Renovent Sky 300 Plus Enthalpy Installation Instructions Manual

7.1

Trouble shooting

When the appliance control system detects a fault, it is indi-
cated on the display of the "Brink Air control" with a spanner
symbol, possibly together with a fault code.
Non-locking fault
10.54
HRU-Ventilation
When the appliance detects a non-locking fault, it will still keep
running (limitedly).
The display does show the fault symbol (spanner).
This fault can be read out in the menu "Messages".
Locking fault
10.59
HRU Ventilation
E104 E104
When the appliance detects a locking fault, it will no longer
work. The (permanently lighted) display shows the fault symbol
(spanner) together with fault code. The red LED on the multiple
Warning
When working on the appliance, always take the voltage from the appliance by first switching it off through software
and subsequently pulling the power plug.
Chapter 7 Fault
01.03.16
0 8 :0 0 17:0 0 -
Filter
01.03.16
E104
Renovent Sky 300 (Plus) Enthalpy 617605-A
2x 2x
 
Resetting

fault

history
2x 2x
 
Resetting
fault
history
switch (if applicable) will be blinking. Contact the installer to
remedy this fault. A locking fault cannot be remedied by taking
the voltage from the appliance; first the fault must be solved.
10.59 01.03.16
Messages
HRU-appliance
History of errors
2x 2x
 
10.59 01.03.16
Messages
Master
History of errors
E103
10.59 01.03.16
Messages
HRU
History of errors
2x 2x
 
10.59 01.03.16
Messages
Master
History of errors
E104
19