Basic Settings Menu - Brink Renovent Sky 300 Plus Enthalpy Installation Instructions Manual

6.4.2 Basic settings menu

From the main menu, turn the right-hand setting knob to
select the "Basic settings" menu and confirm the selection
by pressing the right-hand setting knob. In this menu, you
can select from five submenus, including:
- Language
- Clock
- Date
- Backlight
- Key lock
Language
A A
In this menu you can choose a language; ex factory
the "Brink Air Control" is set for the English language.
Clock
B B
The current time must be set in this menu.
The time is always shown in 24 hours mode.
Date
C C
The current date must be set in this menu;
month and year must be entered.
Backlight
D D
In this menu the display backlighting can be adjusted.
Key lock
E E
This can be used to prevent unwanted use and the
changing of settings.
It will become active 1 minute after the last setting
has been made.
Deactivate the key lock once-only by holding
down the right-hand setting knob for 3 seconds!
Permanently deactivate it by changing the setting
in the key lock menu.
Chapter 6
the day,
Renovent Sky 300 (Plus) Enthalpy 617605-A
Display
10.54 23/11/15
HRU-Ventilation 0 8 :0 0 17:0 0 -
 
10.58
01.03.16
Basic settings
Language
Clock
Date
 
Backlight
Key lock
10.58 01.03.16
Basic settings
Language
Clock
Date
Backlight
Key lock
10.58
01.03.16
Basic settings
Language
Clock
Date
Backlight
Key lock
10.58 01.03.16
Basic settings
Language
Clock
Date
Backlight
Key Lock
10.58 01.03.16
Basic settings
Language
Clock
Date
Backlight
Key lock
10.56
Main menu
Device information
Basic settings
Installer
 
10.56
Language
ENGLISH
Standard: ENGLISH
10.59
UU
Clock
MM
10:59:00
SS
 
10.59
DD
Date
MM
01.03.16
JJ
 
10.59
Backlight
10%
 
Standard: 10%
Range: 5 - 15%
10.59
Key lock
Off
 
Release key lock:
Push rotary button for 3 sec.
17
01.03.16
01.03.16
01.03.16
01.03.16
01.03.16
01.03.16