Electric Connections; Connection Of The Power Plug - Brink Renovent Sky 300 Plus Enthalpy Installation Instructions Manual

5.3

Electric connections

5.3.1 Connecting the power plug
The appliance can be connected to an easily accessible, earthed wall socket with the plug that is mounted to the appliance. The
electric installation must comply with the requirements of your power company.
The appliance comes ready to plug in with a 230 V mains plug
Make allowance for the 1000 W preheater; if in addition
also a postheater or extra preheater is installed, the rated
power increases to 2000 W.
5.3.2 "Brink Air Control" connection
The "Brink Air control" (option) must be connected to the eBus
connector. This (detachable) 2-pole eBus connector is mount-
12
Chapter 5
nr.1 nr.2
Cables to be connected by installer
(wire diameter at least 0,34 mm
Renovent Sky 300 (Plus) Enthalpy 617605-A
Installation
Warning
The fans and control board carry a high voltage. Al-
ways take the voltage from the appliance by pulling
the power plug when working on the appliance.
ed on the outside of the appliance (see also §10.1).
)
2