Applications - Datalogic DX6400 Reference Manual

1

1.2 APPLICATIONS

The DX6400 barcode reader is specifically designed for industrial applications and for all
cases requiring high reading performance such as:
•
omni-directional reading
•
code reconstruction
•
reading of codes covered by plastic film
•
reading of codes with a wide depth of field
•
reading of high resolution codes positioned at medium distances from the reader
•
code reading on fast moving objects
DX6400 is designed for both single-reader layouts and multi-reader layouts. For typical
layouts see paragraph 2.5.
Feature
Modular solution with separated
head and
TM
Step-a-Head feature
Reading on pallets or big objects
where a large reading distance /
wide reading field are needed
Reading parcels on conveyors
Master working as a multiplexer
on a high speed Lonworks bus
Genius™ Configurator SW
2
Benefit
•
base and
•
•
•
•
•
•
•
•
•
•
•
•
Possibility to select the combination of head and
base that best fits the needs of the application.
Great scalability of the offer.
Down time cost reduction, since the decoder base
works even if the head has been removed.
Easy maintenance. In case of replacement of the
head, all the configuration parameters are stored
in the base, and the scanner is automatically
configured.
Easy installation with the minimum room needed.
DX6400 with FLASH
DX6400 implements the Packtrack
which leads to an increase of the plant production
as a result of the augmented system throughput.
Great competitiveness of the offer, since the cost
of an external multiplexer is saved.
High data transfer on a industrial, reliable bus
running at 1,2 Mbit/sec.
Reduced learning time, with an easy wizard
approach.
Multilanguage platform.
All the configuration parameters stored into the
scanner.
Not dependent on the Physical interface.
TM
dynamic focusing system.
TM
functionality,
DX6400