Performance - Datalogic DX6400 Reference Manual

READING FEATURES
In the vast majority of systems the x and z data are not necessary. For
these cases set x = 0, z= 0 during the calibration procedure.
NOTE

4.3 PERFORMANCE

The standard scan rate is 1200 scans/sec (600 scans on each leg).
Refer to the diagrams in par. 4.5 for further details on the reading features. These diagrams
are taken on various resolution sample codes at a 25 °C ambient temperature depending on
the conditions listed under each diagram.
If standard models do not satisfy specific requirements, contact your nearest Datalogic
distributor, supplying code samples, to obtain complete information on the reading
possibilities.
Figure 72 – DX6400 Scan Legs
4
63