Electrical Connections - Datalogic DX6400 Reference Manual

INSTALLATION
The FBK-6000 is a fast bracket kit allowing a quick and easy mounting of the scanner on the
ST-237 bracket.
First, it is necessary to fix the FBK-6000 to the DX6400 scanner by means of the mounting
screws:
Then, attach the assembly to the mounting bracket by slipping the hook into the bracket hole.
Finally, fix it by means of the 2 fixing screws:

2.3 ELECTRICAL CONNECTIONS

All the connectors available for each scanner model are the following:
Scanner Model
Master/Slave
Ethernet
* Do not connect an RS232 port to the 9-pin Lonworks Connector. This may
damage your Laptop PC.
CAUTION
Figure 7 – Mounting the FBK-6000 on the Scanner
Figure 8 – Mounting the Assembly on the Bracket
Connectors
25-pin male serial interface and I/O connector
9-pin male Lonworks connector*
9-pin female Lonworks connector
26-pin male serial interface and I/O connector
9-pin female Lonworks connector
RJ45 modular connector
2
9