Setting Up Your Hp Ipaq; Using Hp Ipaq Quick Gps Connection Utility - HP iPAQ hw6510 User Manual

WARNING! When using hardware and software navigation aids, in a
vehicle or elsewhere, it is your sole responsibility to place, secure, and
use these aids in a manner that will not cause accidents, personal injury,
property damage or obstruct your view.
You are solely responsible for observing safe driving practices. Do not
operate this product while driving. Park the vehicle first.
GPS Navigation is intended for automotive use. It's not appropriate for
use as an Aviation, Maritime, or pedestrian navigation system.

Setting Up Your HP iPAQ

First follow the instructions in the printed
until you complete creating a partnership with your personal
computer. This includes installing the Subscriber Identity Module (SIM)
and battery, synchronizing your HP iPAQ with your personal computer,
and establishing a partnership.
IMPORTANT: If you have completed the steps in the Getting started
guide, you may proceed to the next section,
on Your HP iPAQ."
Setting Up Internet Access on Your HP iPAQ
Now that you have completed the steps in the Getting started guide, verify
you have Internet access on your HP iPAQ by visiting a web site such as
www.google.com
refer to the instructions under

Using HP iPAQ Quick GPS Connection Utility

Quick GPS Connection is a software application residing on the HP iPAQ
that enables a faster connection time for the GPS radio to locate and lock
onto overhead GPS satellites. To improve connection performance, you
need to enable the HP iPAQ Quick GPS Connection Data Utility and
download the latest data file. Even though the GPS radio on your
HP iPAQ is able to connect to the GPS satellites without enabling the
Quick GPS Connection Utility, it may take a few minutes longer and even
up to five minutes to locate the satellites if you do not use this utility.
Due to GPS satellites constantly moving through the sky, it is
recommended that you download updated satellite locations to your
HP iPAQ every two to three days. To download updated satellite
locations, tap
The default settings on the HP iPAQ Quick GPS Connection Utility are set
where the device cannot receive automatic updates unless you enable
the update feature.
To change the default settings:
From the Start menu, tap Settings > Connections > Quick
1.
GPS Connection icon.
or www.yahoo.com. If you cannot access the Internet,
"Accessing the Internet on Your HP iPAQ."
in the Command bar > Download Now.
Getting started
"Setting Up Internet Access
Using GPS Navigation
guide
8–2