HP iPAQ hw6510 User Manual page 88

10. After downloading your free map, a GPS Navigation Voucher
code appears. Write the code on paper and keep it in a safe
place. Use the code when you purchase more maps to receive a
discount.
If you choose not to write the code on a piece of paper, you can
access the voucher number later by tapping, from the Start menu,
Programs > Get a Map & Voucher.
11. Tap X to close the application.
12. Disconnect your HP iPAQ from your personal computer and go
outdoors to start GPS Navigation. Place the HP iPAQ where there
is a clear view of the sky or on the dashboard of a vehicle.
13. Tap Start > GPS Navigation and wait until GPS Navigation
locates you.
Initially, this process may take several minutes.
NOTE: To quickly access the Today screen while you are using GPS
Navigation, press the red
Navigation again, tap the GPS Navigation icon
Command bar.
IMPORTANT: In certain situations the GPS signal strength drops so low
that the GPS receiver cannot help you navigate. When this happens, you
may see a "spinning" effect in the 3D view where the screen can rotate
up to 180 degrees. To address this situation, tap on the map >
Change preferences > Turn off 3D display.
14. Once the application has your location, the next screen asks
"Would you like to specify your 'Home' address now?"
Tap No or Yes.
NOTE: Providing a home address is useful. For example, you can plan a
route back home from anywhere with a single tap on the screen. If you
tap No, you can add it later.
End Call button. To access GPS
Using GPS Navigation
located in the
8–7