Special Keys; Accent Characters - HP iPAQ hw6510 User Manual

Keystroke Combination
Blue Key
Blue Key
"Sticky" Keys
The integrated keyboard uses a "Sticky Key" feature for the Shift and
Blue (Fn) keys (known as "key modifiers"). This means that when you
enter a number or symbol requiring a combination of keys to be pressed,
the key modifier will stay engaged until you press the second key. It is not
necessary to press both keys at the same time.

Special Keys

Key
+
NOTE: To type a backslash (\) on the Thumb keyboard, first press the
Blue (Fn) Key + P to create a forward slash (/), then the Symbol/
Space Bar key to modify it as necessary. Refer to the following "Accent
Characters" section for more information on modifying characters.

Accent Characters

To type any of the accent characters, press the letter you require to be
accented, then press the Blue (Fn) Key and the Symbol/Space bar.
Continue pressing the Blue (Fn) Key and the Space bar until you reach the
desired special character. For example, if you press a, then the Blue Key
and the Symbol/Space Bar, the a will result in à
(Fn) Key and Space Bar again, the à will change to á. If you continue to
press the Blue (Fn) Key and the Space Bar, the accent mark over the a will
continue to change.
To type a capital letter with an accent, press and hold down the Shift key
and press the desired letter, then press the Blue (Fn) Key and the Space
Bar. For example, press Shift + a, then press the Blue (Fn) Key and
the Space Bar, the A will result in À.
+ right arrow
+ OK
Function
Function (Fn) key
Function (Fn) key and
space bar key (English
only)
(continued)
Action
Scrolls right
Closes program
Description
"Sticky Key" for invoking
alternate functions or symbols on
most keys.
Used for selecting alternate
characters and symbols to
replace a character.
.
Learning Input Methods
If you press the Blue
4–3