Phone - HP iPAQ hw6510 User Manual

Phone

For more information on using the Phone, refer to Chapter 5,
Phone Features."
Problem
Phone will not turn on.
I am unable to dial out or
receive incoming phone
calls.
Phone cuts off in the
middle of phone
conversations.
Phone runs out of memory. HP iPAQ automatically manages the allocation of memory
Solution
• Check to see if your SIM card is inserted in the HP iPAQ.
• Be sure the battery in your HP iPAQ is charged.
• If the HP iPAQ is powering on and the phone still does not
turn on, contact your mobile phone service provider for help.
• Check to see if your SIM card is inserted in the HP iPAQ.
• Make sure your wireless connection to your mobile service
provider is turned on and your unit displays the appropriate
signal strength.
• Is the signal strength icon
number of vertical bars in the icon? If so, you may be in an
area outside of the phone network.
• If you still cannot dial out or receive phone calls, contact
your mobile service provider for help.
• Be sure the battery on your HP iPAQ is fully charged.
• Is the signal strength icon
number of vertical bars in the icon? If so, you may be in an
area outside of the phone network.
between storage and program memory. When memory is low,
try the following:
• Move data to a storage card.
• Move e-mail attachments to a storage card.
• Delete e-mail or files no longer needed.
• In Internet Explorer options, delete all files and clear history.
• Delete old or unnecessary files by tapping Start >
Programs > File Explorer. Tap and hold the file, then
from the pop-up menu, tap Delete.
• Remove programs no longer used by tapping Start >
Settings > System tab > Remove Programs. Tap the
program to be removed and then tap Remove.
• Clear program memory by tapping Start > Settings >
System tab > Memory > Running Programs tab. Tap
the programs to be cleared and then tap Stop.
"Using the
displaying a diminished
displaying a diminished
Troubleshooting 14–7