Attaching Units To Numbers - HP 49g+ User Manual

In RPN mode, system flag 117 set to CHOOSE boxes:
1
‚Û
— @@OK@@
@@OK@@
‚Û
@@OK@@
˜ @@OK@@
In ALG mode, system flag 117 set to SOFT menus:
‚Û
) @ TOOLS
@UBASE
1 ‚Ý
‚Û
„« @) V ISC
@@@P@@
`
In RPN mode, system flag 117 set to SOFT menus:
1
‚Û
„« @) V ISC
@@@P@@
‚Û
) @ TOOLS
@UBASE

Attaching units to numbers

To attach a unit object to a number, the number must be followed by an
underscore (‚Ý, key(8,5)). Thus, a force of 5 N will be entered as 5_N.
Here is the sequence of steps to enter this number in ALG mode, system flag
117 set to CHOOSE boxes:
5‚Ý
‚Û
Enter 1 (no underline)
Select the UNITS menu
Select the VISCOSITY option
Select the unit P (poise)
Select the UNITS menu
Select the TOOLS menu
Select the UBASE function
Select the UNITS menu
Select the TOOLS menu
Select the UBASE function
Enter 1 and underline
Select the UNITS menu
Select the VISCOSITY option
Select the unit P (poise)
Convert the units
Enter 1 (no underline)
Select the UNITS menu
Select the VISCOSITY option
Select the unit P (poise)
Select the UNITS menu
Select the TOOLS menu
Select the UBASE function
Enter number and underscore
Access the UNITS menu
Page 3-22