HP 49g+ User Manual page 237

To see the original equations, EQ1 and EQ2, in terms of the primitive
variables listed above, we can use function EVAL applied to each of the
equations, i.e., µ@@@EQ1@@ µ @@@EQ2@@. The equations are listed in the stack
as follows (small font option selected):
We can see that these equations are indeed given in terms of the primitive
variables b, m, y, g, S , n, Cu, Q, and H .
o o
In order to solve for y and Q we need to give values to the other variables.
Suppose we use H = 5 ft, b = 1.5 ft, m = 1, n = 0.012, S = 0.00001, g =
0 0
32.2, and Cu = 1.486. Before being able to use MSLV for the solution, we
need to enter these values into the corresponding variable names. This can
be accomplished as follows:
Page 7-7